Effects of ethylene-octene copolymer (POE) on the brittle to ductile transition of high-density polyethylene/POE blends

Three kinds of ethylene-octene copolymers (POE) were melt-blended with high-density polyethylene (PE-HD) in different proportions. Detailed characterizations were conducted to analyze their structural differences of POE and its effects in toughening PE-HD. The higher molecular weight POE can improve the toughness of PE-HD. 60:40 PE-HD/POE is elongated to break up to 700% while impact strength is 84.7 kJ/m² at −30°C, which is 21-fold of PE-HD. In the brittle to ductile transition (BDT) during impact, the fracture mechanism changes from the crazing mode to the shear yield-plastic deformation mode. The BDT temperature decreases as the POE molecular weight and its content increase. The interface strength in tension is estimated to access their effects. The Boltzmann-type models were successfully extended to describe the typical S-shaped curves in BDT of notched impact strength vs POE content or temperature. The supplementary decay model is suggested for the attenuation in toughening. Transition map in impact is proposed to select the use range of composition (c ) and temperature (T ) for high toughness. The curves are converted into 3D graph of T -c -impact strength for illustrating their coupling-separate effects, and further into the contour map of impact strength in T -c space for finding their partial equivalence.     

A Blue Photosensitizer Realizing Efficient and Stable Green Solar Cells via Color Tuning by the Electrolyte

Semitransparent dye-sensitized solar cells (DSCs) are appealing as aesthetically pleasing and colorful see-through photovoltaics. Green semitransparent DSCs have been presented, but the best ones rely on green zinc porphyrin photosensitizers and high volatile electrolytes. For potential outdoor applications, the zinc porphyrin DSCs employing ionic liquid electrolytes merely reached a power conversion efficiency (PCE) of 6.3% even with opaque mesoporous TiO₂ films. Herein, the new green DSC is realized by using a blue organic photosensitizer in conjunction with an orange ionic-liquid-based electrolyte, presenting a simple and an effective path for color tuning of photovoltaics. The new approach allows for broadly modulating the color from spring green to cyan by tuning the contributions of the light absorption by the dye-sensitized TiO₂ film and the electrolyte layer. The new semitransparent DSCs with spring green to cyan colors have PCEs ranging from 6.7% to 8.1% and show stability for 1000 h under accelerated ageing test at 80 °C, superior to the zinc porphyrin DSCs. The findings pave a new way to achieve efficient and stable colorful solar cells.     

负载型Pt-Fe/SiO_2催化剂催化环己烷一步氧化制己二酸

己二酸是合成尼龙-66和尼龙-46纤维的重要原料,并进一步用于生产许多重要的化工产品。工业上的己二酸多采用以硝酸为氧化剂的两步法合成,该工艺不仅工艺复杂,而且对设备有腐蚀作用,还会释放大量的温室气体N_2O。本文以负载型Pt/SiO_2、Fe/SiO_2和Pt-Fe/SiO_2为催化剂,采用过氧化氢和氧气为氧源,研究了环己烷一步氧化制己二酸的绿色合成路线。对催化剂进行ICP、BET比表面积、XRD、TEM等表征,结果表明,Pt-Fe/SiO_2催化剂中不存在与Pt或Fe对应的衍射峰。在最佳反应条件下,用高压釜进行了催化剂性能评价,结果表明,Pt-Fe/SiO_2催化活性略优于Pt/SiO_2和Fe/SiO_2。在环己烷转化率为28%的情况下,己二酸选择性达到33%。     

赤红球菌组氨酸激酶的融合表达和功能分析

对赤红球菌的组氨酸激酶基因进行密码子优化，将优化后的组氨酸激酶基因（rhks）构建重组表达质粒pGEX-4T-2-rhks。将此质粒导入到大肠杆菌BL21（DE3）中进行异源表达。在25 ℃和1 mmol/L异丙基-β-D-硫代吡喃半乳糖苷诱导条件下，组氨酸激酶融合蛋白（GST-RHK）获得成功表达，并具有催化活性。经谷胱甘肽琼脂糖亲和层析纯化，获得电泳纯的GST-RHK，其中纯化倍数为3.1，得率为19.5%。该蛋白大小约为72.75 kDa，Km、Vmax和Kcat值分别为20.92 μmol/L、0.17 μmol/（L·min）和1.4 min－1。野生型赤红球菌、组氨酸激酶基因增强株sdrhkE和组氨酸激酶基因敲减株sdrhkD在分别含有苯酚、甲苯、氯苯、异辛烷4 种有机溶剂的培养基中培养，菌株sdrhkD的生长情况都优于野生型赤红球菌，菌株sdrhkE的生长情况都低于野生型赤红球菌。本研究为进一步揭示赤红球菌SD3中组氨酸激酶涉及的信号转导途径与赤红球菌有机溶剂耐受性的关联机制提供一定参考依据。     

Collineation measurement: A method for constructing the imperial citadel of Thang Long in harmony with nature

The Imperial Citadel of Thang Long is a crucial case in ancient Vietnam’s planning and design history. Although historical materials indicate that the orientation of the Imperial Citadel of Thang Long has a dialectical unity relationship with the surroundingmountains, current research is only speculative generalization and lacks empirical analysis. Based on existing findings, this paper identifies the collineation measurement as a generalmethod in the Sinosphere countries for determining spatial orientation. Using a mixed-method of historical archives, fieldwork and simulation model, this paper summarizeshistorical cluesandthreedesignperspectives related to spatial orientation by statistical analysis. Further, it analyzes the logic and application of collineation measurement in constructing the Imperial Citadel of Thang Long. The results show that Vietnamese designers used Tàn Viên Mountain as a component of Thang Long city by collineating the twomountain peaks to the west. Tàn Viên Mountain and the highlands extending eastward fromit are used as the key to establishing the position of the Imperial Citadel, setting the spatial structure of human settlements, and the development of city space. The location, layout, and formof important buildings in the Imperial Citadel are also closely related to the surrounding landscape within 50 km.     

A novel approach to fabricate porous alumina ceramics with excellent properties via pore-forming agent combined with sol impregnation technique

An innovative approach for fabricating porous alumina ceramics (PACs) with improved mechanical and thermal properties using walnut shell powders as pore-forming agent combined with alumina sol impregnation is reported in the present work. It is demonstrated that uniform distribution of spherical pores can be observed in as-prepared PACs by using above technical route. The decrease of walnut shell powder sizes significantly promotes the enhancement of crushing strength and reduction of thermal conductivity of the PACs. Meanwhile, the impregnated alumina sol is favoring for the formation of spherical micro-pores, then further improves their mechanical and thermal insulation performances. The lowest thermal conductivity and highest crushing strength of resulting sample reach 0.16?W/m?K and 29.2?MPa, respectively. This novel method offers new possibilities to fabricate high-quality PACs.     

Microstructure and microwave dielectric properties of Al2O3 added Li2ZnTi3O8 ceramics

Recently, the rapid development of advanced communication systems increasingly strongly demands high-performance microwave dielectric ceramics in microwave circuits. Among them, Li₂ZnTi₃O₈ ceramics have been one of the most widely investigated species, due to its high quality factor, moderate firing conditions and low cost. However, the dielectric constants of the already reported Li₂ZnTi₃O₈ ceramics are fixed in a narrow range, limiting their wider applications. To adjust the dielectric constant of the Li₂ZnTi₃O₈ based ceramics, in this work Li₂ZnTi₃O₈ ceramics added with different amounts of Al₂O₃ (0–8?wt%) were prepared by conventional solid-state reaction. The microstructure and microwave dielectric properties of the samples were investigated. Due to the addition of Al₂O₃, the sintering temperature of the ceramics would be increased somewhat. Some Al³⁺ ions could substitute for Ti⁴⁺ ions in Li₂ZnTi₃O₈, and the added Al₂O₃ would react with ZnO to produce a ZnAl₂O₄ phase accompanying with the formation of TiO₂ phase, which would inhibit the growth of Li₂ZnTi₃O₈ grains. The dielectric constant of the finally obtained ceramics would be reduced from 26.2 to 17.9, although the quality factors of the obtained ceramics would decrease somewhat and the temperature coefficient of resonant frequency would deviate further from zero.     

Ultrasonic-vibration-assisted laser annealing of fluorine-doped tin oxide thin films for improving optical and electrical properties: Overlapping rate optimization

An ultrasonic-vibration-assisted laser annealing method was developed to enhance the performance of fluorine-doped tin oxide (FTO) thin films. The influences of ultrasonic vibration, laser scan line overlapping rate (L_OR) and laser spot overlapping rate (S_OR) on surface morphology, FTO layer thickness, RMS roughness, crystal structure and photoelectric properties of the FTO films were investigated. The results indicated that the presence of ultrasonic vibration during laser annealing could significantly enhance the film compactness, and using moderate L_OR and S_OR values resulted in significantly decreased FTO layer thicknesses and RMS roughnesses as well as slightly increased crystallite sizes, thus yielding significantly improved optical transmittance values and slightly enhanced electrical conductivity values. It was found that the optimal L_OR and S_OR values for ultrasonic-vibration-assisted laser annealing of the FTO films were 80% and 90%, respectively. The as-obtained film possessed the best overall photoelectric property with an average transmittance (400–800?nm) of 85.9%, a sheet resistance of 8.7?Ω/sq and a figure of merit of 2.51?×?10^–2 Ω^–1. This work may be of great significance in terms of performance optimization of transparent conducting oxide (TCO) thin films.     

Preparation of biaxially textured Ce1-x(Y0.2Zr0.8)xOδ buffer layers on RABiTS NiW tapes by chemical solution deposition

Highly (100)-oriented Ce_1-x(Y_0.2Zr_0.8)_xO_δ (CYZO) films were prepared on biaxially textured NiW substrates by a chemical solution deposition approach using metal inorganic salts as starting materials. It has been found that both the preferential orientation and surface roughness of CYZO films decrease gradually with increasing of the doping percentage of Y³⁺ and Zr⁴⁺ ions. The epitaxial growth relationship of (220)_CYZO//(200)_NiW and [00?l]_CYZO//[001]_NiW was demonstrated by XRD texture measurement as well as atomic resolution STEM observation. XRD, Raman and XPS spectra results indicate that Y³⁺ and Zr⁴⁺ ions were indeed introduced into CeO₂ lattice to substitute Ce⁴⁺ ions and form cubic fluorite CYZO solid solution. Moreover, CeO₂ buffer layer can be endowed a strong enough capability to prevent element diffusion through co-doping of yttrium and zirconium, provided that an optimal doping ratio of them is adopted. This will provide a new approach to fabricating strong-barrier single buffer layer for coated conductor.